The motor vehicle industry has made significant strides in shielding new cars from rust ravages. New and improved body design and coatings have slashed the risk of both galvanic and simple corrosion. But don’t toss car rust prevention plans out the window just yet. There is substantial evidence rust hasn’t been entirely erased from the reliability concerns that have long plagued car owners.
Better Design Means Lower Car Rust Risk
In the mid-1990s, rust damage was such a serious and pervasive problem for vehicle owners, it cost $300 billion annually in repairs, according to CarTalk.com. It was around that time vehicle manufacturers started coating steel components with zinc, improving their paints and designing vehicles without body pockets prone to trapping mud and moisture. Steel rocker panels were also replaced with plastic, reducing the potential for trapped moisture.
All of this is good news for car owners, but it hasn’t entirely eliminated the corrosion concerns. Although the bulk of corrosion occurs in the winter, most drivers only begin to notice its effects in springtime. Car rust prevention shouldn’t be overlooked by owners of newer model cars, no matter how fresh-off-the-lot. AAA has reported that road de-icers – specifically salt and chemical solutions – result in $3 billion annually in rust damage (nearly $15. billion over the course of five years).
And of course, owners of older and classic model cars are always going to wrestle with rust threat. People spend tens of thousands of dollars to restore these vehicles – only to leave them in a drafty garage covered by a thin sheet. It should be no surprise when rust sets in again. Some owners battle this problem with regular paint touch-ups, frequent undercarriage washing and steering clear of salt-lined roads or venturing out in rain or humidity. These are smart steps, but best topped off with Zerust car rust prevention tools, such as the car cover. Offering several years of protection, these covers do more than just shield against water, sun and other elements. They also provide the unique benefit of rust prevention with non-toxic, odorless vapors. Read More ›
Boat rust prevention is an essential part of vessel maintenance, whether you have a dinghy or a bow rider.
Many boats are built with a wide range of metallic components, often exposed directly to the elements. When the metal boat parts make contact with the combination of oxygen and moisture – even when the boat is in storage – it’s the textbook recipe for rust. Salt water, high temperatures and excess humidity make a bad situation worse. And it’s not solely the exterior that’s at risk. Corrosion is a threat throughout, posing a hazard to the mast and rigging, the wires, the valves and steering systems.
Too many seafarers have had their boating seasons grounded by the failure to keep rust at bay.
Zerust boat rust prevention is vital to keeping your vessel in top shape. High-performance Vapor Capsules for Boats are a means of effectively controlling the hazard. Rust can be difficult to manage once it’s taken hold of your hull, but these capsules can help halt it from forming in the first place. The vessel structure, propeller, electrical systems and motor are all at risk. Read More ›